Richer London

An International Education,
A London Location,
A Global Future

Dr Ali Aboutorabi

Associate Professor

Dr Neema Parvini

Dr Ali Aboutorabi

Biography

Dr Aboutorabi has extensive experience in UK higher education system, spanning over 35 years, from teaching to research and cutting-edge management. He is an expert in statistical analysis of engineering structures including nano-composites, and industrial quality management systems. He is a fellow of Institute of Manufacturing of UK.

He followed his BSc degree from Sharif University in Iran with a MSc at Manchester University in the UK, and earned his PhD from Glasgow University in 1985 where he worked as a Research Assistant on statistical failure analysis of North Sea offshore structures. From 1985 to 1989 He worked on his Post Doc research degree at Brunel University in London leading a multi-disciplinary project on welding & failure prevention of PE gas pipeline systems.

Dr Aboutorbi is also experienced in leadership and management in Higher Education through his various roles as course director, deputy dean of faculty, director of postgraduate studies and external examiner at other British Universities. He has designed and delivered many international leadership short courses in the UK and internationally, some in association with Oxford University.

External activities

  • Honorary Fellow at Kingston University London.
  • Design and delivery of a short course entitled “Knowledge Based companies: opportunities and risks” during 25th international conference in Engineering, Ian (May 2017)
  • Honorary Dean at Nazeer Hussain University in Karachi, Pakistan, to design and validate academic structure and quality assurance procedures (2013 – 2015)
  • Design, management and delivery of residential short courses in “Leadership in Higher Education” in association with Oxford University and Leadership Foundation (2008 – 2010)
  • Development of 2+1 PhD programmes for academics from Azad University Iran, in association with 6 British Universities
  • Design, development and delivery of an MSc course in Engineering Management for practicing engineers from Kuwait supported by Engineering Society of Kuwait
  • External examiner for Greenwich University & MSA University in Cairo, Egypt, from 2005 to 2010.
  • Current External examiner at Oxford Brooks University.
  • PhD external examiner 

PUBLICATIONS:

Book Chapters

  1. Aboutorabi & H. Ghasemnejad, Book chapter; Handbook of natural fibre composites: Properties, processes, failure and applications, Chapter 13, Woodhead Publishing, 2013.
  2. Aboutorabi, H. Ghasemnejad, H. Hadavinia; Energy Absorption of GFRP Composite Crash Box in Structures Under Shock and Impact, ISBN 13:781845641078, WIT press, 2008.

Journal Papers

  1. Aboutorabi, G. Liaghat, et al; “Static Analysis of Hybrid Laminated Beam Using Unified Zig-Zag Theory Subjected to Point Loading”, Journal of Aerospace Science and Technology, Elsevier publishing, September 2017.
  2. Aboutorabi, G. Liaghat, et al; “Experimental and Numerical Analysis of Penetration into Kevlar Fabric Impregnated with Shear thickening fluid”, Journal of Thermoplastic Composite Materials, May 2017.
  3. H Shanazari, A Aboutorabi, et al; “Analytical investigation of high-velocity impact on hybrid unidirectional/woven composite panels”, Journal of Thermoplastic Composite Materials, Sept 2015.
  4. Aboutorabi, Z. Khan, Nasim A. Khan; “Extraction of Metallurgical Grade Silicon (MGS) from Raw Mineral Quartz available in Pakistan”, SYLWAN issue Vol. 158, June 2014.
  5. H Ahmadi, G Liaghat, A Aboutorabi; “Quasi-static and dynamic compressive properties of ceramic micro-balloon filled syntactic foam”, Journal of Composite Materials published online, May 2014.
  6. Aboutorabi, A. Bagherzadeh;” Cross university collaboration model for Engineering and Technology education between developed and developing countries”, World Transactions on Engineering and Technology Education, Vol.11, No.3, Nov 2013
  7. Liaghat, A. Aboutorabi, et al; A Modified Analytical Model for Analysis of Perforation of Projectile into Ceramic Composite Targets”, GH, International Journal of Composite Materials 2013, 3(6B): 17-22 DOI: 10.5923/, October2013.
  8. Aboutorabi, H. Ghasemnejad; “Cohesive zone modelling (CZM) in prediction of transverse cracking in laminated composite structures”, Journal of Materials Science and Engineering, 5(1), ISSN 1934-8959, 2011
  9. Aboutorabi, H Singh; “Optimum Configuration of Compound Parabolic Concentrator (CPC) Solar Water Heater Types for Dwellings Situated in the Northern Maritime Climate”, International Journal of Ambient Energy, 31(1), pp. 47-52., 2010
  10. England, A. Aboutorabi; “Design of Automotive Metal and Composite Chassis Structures”, Recent Patents on Mechanical Engineering, Bentham Science, November2010
  11. Aboutorabi, H. Ghasemnejad; “Effect of Delamination Failure in Crashworthiness Analysis of Hybrid Composite Box Structures”, journal of Materials and Design, Elsevier, 2010
  12. Aboutorabi, H. Ghasemnejad, H. Hadavinia, “Analytical Approach for Progressive Failure Crushing Modes of woven FRP composite box structures”, World Journal of Engineering, ISSN 1708-5284, 2009
  13. Hadavinia, A. Aboutorabi, “Shear Deformation Beam Model for End Notched Flexure to Characterise Mode II Delamination Fracture Energy”, International Journal of Solids and Structures, 2009
  14. Ghasemnejad, A. Aboutorabi, “Energy Absorption of Thin-walled Corrugated Crash Box in Axial Crushing”, Journal of Structural Durability and Health Monitoring, Tech Science Press, 2008
  15. Aboutorabi, H. Hadavinia, et al; “Deriving Shear Correction Factor for Thick Laminated Plates Using the Energy Equivalence Method”, Journal of Structural Durability and Health Monitoring, 2006

Conferences papers

  1. Aboutorabi, “Transnational Engineering Education: A Collaboration model between UK and Greece universities”, 21st International Scientific Conference, June 2017, Burgos, Bulgaria.
  2. Ghasemnejad, A. Aboutorabi, “Theoretical Models to Predict Impact Response of Aircraft Composite Structures: Variable Stiffness Effects”, The 25th Annual International Conference on Mechanical Engineering, ISME2017, 2-4 May 2017, TMU, Iran
  3. Aboutorabi, “new approaches to design of educational spaces for effective learning”, key note speech, ICUDTS 2016, Iran, March 2016
  4. Aboutorabi, A. Bagherzadeh, “An Innovative Collaboration Model for PhD Studies between Universities from Iran and UK”, ASAIHL 2015, May 2015
  5. Fazel Larijani, A. Aboutorabi, “Development of an International University for D-8 Organisation” ASAIHL 2015, May 2015
  6. Aboutorabi, “Internationalisation of engineering education”, key note speech, ICUDTS 2014, Iran, March 2014
  7. Razmkhah, A. Aboutorabi, “Care of Elderly People: Hip Fracture Injuries”, The 19th Congress of the European Society of Biomechanics (ESB 2013), Greece, 2013
  8. Aboutorabi, “New developments in engineering education and research”, Proc. 3rd International Congress of Recent Advances in Engineering 2013, ICRAE2013, March 2013
  9. Aboutorabi, “Modern approaches to developing learning and teaching strategies”, Proc. Leadership in Higher Education, Oxford Academy for Education and Development, May 2013
  10. Ghasemnejad, A. Aboutorabi, “Advanced application of natural fibres in high performance automotive composite structures”, The 19th International Conference on COMPOSITES/NANO ENGINEERING (ICCE-19), Shanghai, China, 2011
  11. Aboutorabi, H. Ghasemnejad, “Cohesive zone modelling (CZM) of Mode-I & Mode-II interlaminar crack propagation in laminated composite structures”, The 8th International Conference on COMPOSITES/NANO ENGINEERING (ICCE -18), Alaska, USA, 2010
  12. Ghasemnejad, A. Aboutorabi, “Theoretical Prediction of Mean Crushing Force in Progressive Failure of Woven FRP Composite Box Structures”, The 8th International Conference on COMPOSITES/NANO ENGINEERING (ICCE-17), Hawaii, USA, 2009
  13. Aboutorabi, H. Ghasemnejad, “Study on energy absorption of GFRP composite crash box”, 10th International Conference on Structures Under Shock and Impact, Portugal, 2008
  14. Aboutorabi, et al, “Determination of Mode II Fracture Toughness in Delamination of Angle-Ply Composite Beams”, International Conference of Mechanical Engineering, London, UK, 2007
  15. Aboutorabi, H. Hadavinia, “Calculation of Energy Release Rate in Mode I Delamination of Angle Ply Laminated Composites”, The 14th ICCES Conference, Miami, USA, 2007
  16. Aboutorabi, “Benchmarking and Output Standards in Engineering Education”, Higher Education Seminar, Emirate Aviation College, Dubai, April 2005

Special publications

  1. Aboutorabi, T. Mir, N. Golzari, “Quality assurance structure for NHU compatible with QAA and Higher Education Commission of Pakistan”, Jan 2015
  2. Aboutorabi & H. Moghaddam, “Academic Structure of an international university for D8 Islamic countries”, June 2014
  3. Aboutorabi &H. Moghaddam, “towards 2020: Internationalisation strategy for Islamic Azad University of Iran”, February 2014
  4. Aboutorabi & J. Askari “Engineering courses towards development of a sustainable energy supply in Pakistan”, NH University executive board, August 2013
  5. Aboutorabi & P. Mason, “Quality assurance proposal for a new on-line university in Oman”, 2013.

Some of the courses I teach:

MTH 4120 – Probability & Statistics
MTH 4110 – Calculus with Applications
MTH 3111 – Functions and Applications
MTH 3000 – Fundamentals of Mathematics